Small Easy Install Cnc Water Jet Cutter Abrasive Waterjet Cutting Machine
Inner Table Working Area
1.000 mm x 2.000 mm (3.28' x 6.56')
Rapid Speed
0 - 9000mm / min (0-29.53' / min)
Positioning Accuracy
± 0,02 mm (± 0,0008")
Repeatability
± 0,01 mm (± 0,003")
Software
FASTCAM, IGEMS
Drive Mechanism
Ball screw driven in all axes
Bulk Feed Hopper
400 lb SmartFeed Hopper
SPECIFICATIONS FOR WATER JET CUTTING MACHINE
Max. pressure
420MPA/60000psi
Max. flow rate
3.7L / min
Electrical source voltage
3 phases 220/380 Voltage, 50/60Hz, 37KW, 50HP
Max. diameter of nozzle / orifice
1.02mm / 0.33mm
Max. delivery capacity of oil pump
106L / min
Max cutting heads
1-10 cutting heads (1 for standard machine)
>>>Try to Read This · Our Service
1. Maintenance free of charge for 12 months. 2. We will provide the consumable parts at an agency price. 3. 24 hours online service, free technical support. 4. Machine has been adjusted before delivery, operation disk is included in the delivery. If there is any other questions, pls kindly tell me. 5. We have manual instruction and Videos for software Installation, operation and machine's using and maintenance; We will send professional technician to customers' factory, provide them two-weeks training, including working principle of machine, Auto CAD drawing, common problems and solution, etc.
>>>Try to Read This · FAQ Q1: Does This Machine Pass CE Certificate? A2: Yes, this machine passed European CE certificate and meet Safety Standard. Q2: How much of cutting thickness? A2: Marble is 0-120mm; granite is 0-110mm; tiles are 0-40mm; glass and mosaic is 0-80mm; steel, stainless steel, copper is 0-60mm; aluminum is 0-80mm; plastic, acrylic, foam is 0-200mm. With our double-pressures system, it can cut 0-160mm steel sheet, 0-200mm stones. It is good for customers cut thicker materials. Q3: How fast of speed? A3: Speed depends on cutomers' materials and cutting requirement, and customers can adjust speed parameters.
Keep safety
Although anything can be cut through, waterjet is still very safe. It is because we don't need to put any body parts under the waterjet cutting head while it is on, obviously. If there is a leak in a high-pressure water system will tend pressure rapidly drop to safe level. Water itself is safe and non-explosive and the garnet abrasive is also inert and non-toxic. So using waterjet to cut material is very safety. Environmentally friendly As long as we are not machining a material that is hazardous, the spent abrasive and waste material become suitable for land fill. The garnet abrasive is inert and can be disposed of with our other trash.If we are machining lots of lead or other hazardous materials, we will still need to dispose of our waste appropriately, and recycle the water. Keep in mind, however, that very little metal is actually removed in the cutting process. This keeps the environmental impact relatively low, even if we do machine the occasional hazardous most areas, excess water is simply drained to the sewer. In some areas, water treatment may be necessary prior to draining to sewer. In a few areas, a "closed loop" system that recycles the water may be required.
why choose HEAD water jet
1. Competitive price: It is can meet your budget and best-selling business very well. 2. OEM Accepted: We can produce any your request design. 3. Good Service: We treat clients as friends. 4. Good Quality: We have strict quality control system. Good reputation in the market. 5. Fast & Delivery: We have big discount from forwarder
>>>Brief Introduction Of HEAD waterjet company
Quality and credit goes all the way. HEAD, a company surviving fierce market competition, has very strong national culture, and develops shoulder by shoulder with the world and this Era. We are determined to achieve our dreams step by step with the advantages of high technology.
Our Package Advantage: 1. Our Wooden Case is after fumigation treatment. Needn't timber inspection,saving shipping time. 2. All the spare parts of the machine were bovered by some soft materials,mainly using Pearl Wool. Avoiding all damages that could happen in the delivery process.Then we’ll covered plastic wrap out it tightly, make sure intact of the covered soft materials,also avoiding Waterproof and rust proof. 3. The outmost is Wooden Case With Fixed Formwork. 4. The bottom of the wooden case has firm iron jack,convenient to Handling and transport.
Before delivery, we would do the test about 20-30 working hours for machine, and use standard packing to each configuration. We choose famous export company and transport company, making shipment more convenient and safer.
HEAD WATER JET MAKES CUTTING IS NO LONGER PROBLEM!
Please
Product Description
1020 water cutter manufacture abrasive water jet metal price cnc mini waterjet cutting machine
INCREDIBLY POWERFUL
Equipped with the same cutting power as our most industrial waterjets, the HEAD Cantilever Type Waterjet does not compromise on functionality or versatility.
UNBELIEVABLY COMPACT
The space-saving design features an integrated abrasive feed system with optional water-level control and an abrasive removal system.
HEAD Cantilever Series Waterjet cutting machine-easy for load materials.
HEAD Cantilever Type Series-Introducing the incredibly powerful and unbelievably compact Cantilever- Series waterjet. Equipped with the same cutting power as our most industrial waterjets, the HEAD Cantilever Type Waterjet does not compromise on functionality or versatility.
HEAD 420Mpa High Pressure Pump
1. The main parts of the intensifier is from Accustream brand
2. The main motor is Siemens(Beide)brand, and power is 37kw, 50hz
3. The accumulator is 1.2L, and free maintenance for life.
4. The pump has the function of low pressure and high pressure exchange function, when drill the first hole, it will be low pressure and when cutting it will change into high pressure, the process is controlled by professional water jet software.
5. The intensifier pump is working very stable, and most customers are using it for working.
6. The amount of water flow is 3.8L/min, the abrasive amount is 20kg/h, the diameter of nozzle is 1mm, and the diameter of orifice is 0.33mm, these data is the most proper match for higher efficiency and economical work, for different materials and different thickness, only need to change the cutting speed can get the good cutting result, only need to change other data.
7. The intensifier pump will be test for 24 hours before leave from factory, which can guarantee the safety and the stable of machine working
Cutting Samples
Service & FAQ
1. Maintenance free of charge for
12 months.
2. We will provide the consumable parts at an agency price.
3.
24 hours online service
free technical support.
4. Machine has been adjusted before delivery, operation disk is included in the delivery. If there is any other questions, pls kindly tell me.
5. We have manual instruction and
Videos for software Installation
operation and machine's using and maintenance; We will send professional technician to customers' factory, provide them two-weeks training
including working principle of machine, Auto CAD drawing, common problems and solution, etc
>>>Try to Read This · FAQ
Q1: Does This Machine Pass CE Certificate?
A2: Yes, this machine passed
European CE
certificate and meet
Safety Standard.
Q2: How much of cutting thickness?
A2: Marble is 0-120mm; granite is 0-110mm; tiles are 0-40mm; glass and mosaic is 0-80mm; steel, stainless steel, copper is 0-60mm; aluminum is 0-80mm; plastic, acrylic, foam is 0-200mm. With our double-pressures system, it can cut 0-160mm steel sheet, 0-200mm stones. It is good for customers cut thicker materials.
Q3: How fast of
speed
?
A3: Speed depends on cutomers' materials and cutting requirement, and customers can adjust speed parameters.
Although anything can be cut through, waterjet is still very safe. It is because we don't need to put any body parts under the waterjet cutting head while it is on, obviously. If there is a leak in a high-pressure water system will tend pressure rapidly drop to safe level. Water itself is safe and non-explosive and the garnet abrasive is also inert and non-toxic. So using waterjet to cut material is very safety.
Environmentally friendly
As long as we are not machining a material that is hazardous, the spent abrasive and waste material become suitable for land fill. The garnet abrasive is inert and can be disposed of with our other trash.If we are machining lots of lead or other hazardous materials, we will still need to dispose of our waste appropriately, and recycle the water. Keep in mind, however, that very little metal is actually removed in the cutting process. This keeps the environmental impact relatively low, even if we do machine the occasional hazardous most areas, excess water is simply drained to the sewer. In some areas, water treatment may be necessary prior to draining to sewer. In a few areas, a "closed loop" system that recycles the water may be required.
1.
Competitive price
It is can meet your budget and best-selling business very well.
2.
OEM Accepted
We can produce any your request design.
Good Service
We treat clients as friends.
4.
Good Quality
We have strict quality control system. Good reputation in the market.
5.
Fast & Delivery
We have big discount from forwarder
Customer Feedback
About our company
00:00
HEAD water jet is an independent technology research and development, high-tech, promote high-quality, high credibility of the focus on large-scale ultra-high pressure water cutting machine manufacturer. Has been engaged in water jet cutting research, manufacturing, is one of the most professional water jet manufacturers in the stone parquet, glass parquet, metal shaped cutting, aerospace, and other fields of research and manufacturing. We are a manufacturing and trading combo for water jet cutting machine in Liaoning, with more than 15 years full experience and a professional sales team.
HEAD water jet, so cutting is no longer a problem!
Packing & Delivery
Our Package Advantage
1. Our
Wooden Case
is after fumigation treatment. Needn't timber inspection,saving shipping time.
2. All the spare parts of the machine were bovered by some soft materials,mainly using Pearl Wool.
Avoiding all damages that could happen in the delivery process.Then we’ll covered plastic wrap out it tightly, make sure intact of the covered soft materials,also avoiding Waterproof and rust proof.
3. The outmost is Wooden Case With Fixed Formwork.
4. The bottom of the wooden case has firm iron jack,convenient to Handling and transport.
Before delivery
we would do the test about
20-30
working hours for machine, and use standard packing to each configuration. We choose famous export company and transport company, making shipment more convenient and safer.
Recommended by seller
$55,000
set
