Descriptions
IBOP for top drive can be divided into Upper IBOP and Lower IBOP; they are control valves which are used with the top drive system. Usually the two valves connected to the top drive drilling device. The IBOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi. When well kick occurring, The upper IBOP can be closed by remote controlled, but the lower IBOP will be closed manually. Actuator for top drive is a subsidiary body which controls open and close of Upper IBOP. It works with other accessories of the rig, so that control opening and closing of Upper IBOP on any height of derrick driller console. Both the valve body cavity and accessories have special Anti-corrosive processing, so that prolong the working life.
Features
1. Available with a wide variety of sizes and end connections
2. Two piece body with full drift bores
3. Operating wrench and thread protectors included
4. Major repair kits available for every valve
5. Comes with certified test report
6. Identifiable open and close markings
7. Can be H2S corrosion resistant as per NACE MR0175
Specifications
| Thread connection | O.D. mm(inch) | I.D. mm(inch) | OAL mm(inch) | Working pressure (Mpa) |
| NC26 | 88.9 (3-1/2) | 31.75 (1-1/4) | 686 (27) | 70 (35) |
| NC26 | 95 (3-3/4) | 35 (1-3/8) | 660 (26) | 70 (35) |
| NC31 | 104.8 (4-1/8) | 41.3 (1-5/8) | 711 (28) | 70 (35) |
| NC31 | 111 (4-3/8) | 35 (1-3/8) | 670 (26-3/8) | 70 (35) |
| NC38 | 120.1 (4-3/4) | 50 (2) | 462 (30) | 70 (35) |
| NC38 | 121 (4-3/4) | 45 ( 1- 49/64) | 685 (26-31/32) | 70 (35) |
| NC46 | 158.75 (6-1/4) | 61.9 (2-7/16) | 838 (33) | 70 (35) |
| NC50 | 159 (6-1/4) | 57.2 (2-1/4) | 760 (29-59/64) | 70 (35) |
| NC50 | 165 (6-1/2) | 57.2 (2-1/4) | 760 (29-59/64) | 70 (35) |
| NC50 | 168.28 (6-5/8) | 71.4 (2 13/16) | 838 (33) | 70 (35) |
| 5 1/2FH | 177.8 (7) | 76.2 (3) | 889 (35) | 70 (35) |
| HT55 | 17 7.8 (7) | 57.2 (2-1/4) | 998 (38-57/64) | 70 (35) |
| 6-5/8REG | 203.2 (8) | 76.2 (3) | 965 (38) | 70 (35) |
| 6-5/8REG | 203.2 (8) | 71.4 (2-13/16) | 998 (38-57/64) | 70 (35) |
| 7-5/8REG | 241(9-1/2) | 71.4 (2-13/16) | 998 (38-57/64) | 70 (35) |
| 7-5/8REG | 241(9-1/2) | 76.2 ( 3 ) | 965 (38) | 70 (35) |




-
Step 1
Payment and order readiness
Minimum order: 1 Units
Payment terms, specifications, and order details are confirmed before preparation begins.
-
Step 2
Preparation
30 days
-
Step 3
Packaging and dispatch
Packaging details are available on request.
Final packing, freight, and delivery dates are confirmed before dispatch.
Customer reviews
No reviews yet
Be the first customer to review this product.
Write a review
Request custom sourcing
Can’t find what you’re looking for? Share the requirement and our sourcing team will find the right industrial product.