VS1046H Road Machinery 1000mm Gasoline Ride on Power Trowel Concrete Floor Power Trowel Machine

Highlights at a glance

• Fault Self-Diagnostic Light Panel: The ECU control box features integrated LED indicator lights. Specific lights illuminate to signal anomalies such as abnormal oil pressure, engine overheating, or charging system faults, allowing maintenance personnel to pinpoint and address the issue directly without needing to connect a computer to read diagnostic codes.
• Full-Body Heavy-Duty Anti-Corrosion Coating: Features an epoxy zinc-rich primer and a polyurethane baked enamel topcoat, achieving a total dry film thickness of 120μm. Having passed salt spray tests exceeding 500 hours, the machine remains highly resistant to rust, even in coastal or high-humidity construction environments.
• Key Components Made of Stainless Steel: Spray nozzles, water tank lid hinges, oil dipsticks, and electrical connectors are all constructed from 304 stainless steel, completely eliminating issues such as seizing or poor electrical
• IP67 Waterproof Connectors: Engine wiring harnesses, starter motors, and sensor interfaces utilize a combination of waterproof sealing rings and silicone grease filling; this ensures that no short circuits or signal drift occur, even when the chassis is subjected to high-pressure water jet cleaning.
• Anti-Cement-Accumulation Chassis Geometry: The underside of the chassis features a sloped design with chamfered edges to facilitate cement shedding; before curing, cement slurry automatically slides off due to gravity, significantly reducing the labor required for manual cement removal.
• Double-Sealed Bearings: The cutter head bearings employ a combined sealing system featuring double-lip oil seals and a labyrinth seal. The outer layer prevents the ingress of cement slurry, while the inner layer prevents grease leakage, thereby extending the bearing's service life to three times that of standard models.

00:00