Cost-effective Lithium Battery Recycling Machine Lithium Battery Dismantling Machine Lithium Battery Lecycling Plant

Cost-effective lithium Battery Recycling Machine Lithium Battery Dismantling Machine Lithium Battery Lecycling Plant

The lithium battery recycling plant is used for dismantling and recycling the Soft package battery

The final products are black mass, aluminum granules, copper granules, plastic, steel shell and separator plastic etc. The output will vary depending on the type of battery.

The lithium battery recycling plant consists of multiple machines working together, the following is a description of some of the core equipment

Shredder: Shredded lithium batteries into smaller pieces. Hammer crusher: For the secondary crushing of shredded materials. Grinder: For the grinding of the crushed materials. Separation Machine: Separate the materials after being ground. Collector: Collect and release the dust. Pulse Purifier (Air Cleaner): Clean all the dust produced during the operation of the wholesystem. Classifying Screen: Screen the materials sorted by the separation machine,and screen out oflarger metal materials. Magnetic Machine: Separate nickel from the metals. Gravity Separator: Separate those finer materials got from the screening machine and separatethe metal completely. High-pressure blower: Keep the whole system in a negative state so as to collect the materialsand purity the air.

1) Through the combined process of hammer crushing, vibrating screening and air separation, the resource utilization of metals and positive and negative powder in the positive and negative electrode materials of waste lithium batteries can be realized.

2) The positive and negative materials can be effectively separated from each other by hammer vibration crushing, and then the metal and positive and negative powder can be initially separated by vibration sieving based on the size difference and shape difference between particles. The results of hammer vibration stripping and sieving separation showed that the metal and positive and negative powder were enriched in the particle size range of particle size greater than 0.250 mm and particle size less than 0.125 mm, respectively, with grades up to 92.4% and 96.6%, which could be directly sent to downstream enterprises for recycling.

3) For the broken particles with a particle size of 0.125~0.250 mm and low metal grade, the effective separation between metal and positive and negative powder can be achieved by air separation. When the air speed is 1.00 m/s, good recovery effect can be achieved, and the recovery rate of metal can reach 92.3% and the grade can reach 84.4%

4) The complete set of equipment operates in the negative pressure state, no dust leakage, and the separation efficiency can reach more than 98%.

Notice: 1.Big machines packed in nude or shipping in containers. 2. Spare parts packed in wooden case. 3. If you have any special requirement, we will pack as request.

Q1: Are you the manufacture?