Gantry type cutting platform.
Sink is rugged and reliable, with fully stainless steel sheet.
Professional manufacturing technique which make sure that the machine can achieve maximum stability without deformation under high speed operation and vibration.
We separate the sink from the cutting table for easy transport and better protection of the stability of the frame.
The base of cutting platform is a cast iron frame, made of thickened steel sheet, which ensure the necessary rigidity in the harsh working conditions. The processing through double housing planer, to eliminate deformation and guarantee its’ accuracy.
The X-axis of the cutting platform is made of aluminum alloy and is characterized by light weight, good structure, no deformation. This is the most advanced technology in the field of water cutting.
A pair of ball screws ( ABBA) and linear guide ( IRSO), to ensure its high precision, good quality and long service life.
Servo motor and driver, reliable control, stable operation without low-frequency resonance.
Limit switch Omron.
Linear guide and ball screw adopt automatic lubrication supply system to make the machine maintenance convenient and extend the life of the machine. Sink height 700 mm.
The sink is mounted on a special adjusting bracket.
Platform structure
Gantry type
Available Cutting range
X-3000mm,Y-2000mm,Z-200mm
Voltage
380V(220V/420V/110V Accept customization)
Nominal power
37 kW / 50 HP
Max Swing Angle
±68°(AC 5 Axis), ±10°(AB 5 Axis)
Swing Angle precision
±0.1°
Cutting accuracy
±0.1mm
Continuous working pressure
320MPa-380MPa
Re-position accuracy
0.025mm
Max. Travel Speed
10m/Min.
Operating software
WEIHONG
Nominal power rate of X.Y Axis
0.8KW/pc
Nominal power rate of Z.A.B Axis
0.4KW/pc
Maximum working pressure
4136 bar
Maximum flow
4.1L/min
Hydraulic tank capacity
211L
Pressure accumulator volume
1L/2L
Water inlet pressure
2.4 - 5.5 bar
Nominal current
72 A
Protection at 400 V / 50 Hz
80 A
System Version
Win7/Win10
Formats
DXF/G/ENG/OLT
Abrasive delivery system Volume
200KGS
Display
Industrial-grade Display
Total Weight
5500 Kg
The main parts of water jet cutting machine
The split cutting table prevents the influence of long-term stress change on the bearing platform and improves the cutting accuracy.
All stainless steel body, rust and corrosion prevention, prolonging the service life of the equipment.
Strengthening the ball screw and slider can better absorb vibration energy and have higher driving accuracy
Absolute Encoder System,The anti-interference characteristics and data reliability are greatly improved
Main Features (intensifier pump model are optional)
Energy-Saving Stand-by Time no power consumption
Pressure Stabilization, Low fluctuated pressure byServo Motor, stabilize HP waterjet, extend the service life andimprove accuracy
Less Noise, Less Heat, Working Noise by Servo Motorless than 65 dBs
Dual Intensifier Design (Optional), Alternating Work from one to another, continuously work 24/7
2L Attenuator, Large Capacity Attenuator, lower thefluctuation of HP Water, Fully-Integrated body, maintenance-free
Touch Screen Dynamic Operation Panel, Fast Switching andtroubleshooting, monitoring the work condition of intensifier pump
Variable Pump, Zero Pressure on Standby - Low Pressure onStartup - High Pressure Operation
Double Oil Filtration, Filters set on Inlet and Return,ensure high purity of hydraulic oil
Material
Thickness
0.33mm orifice
320Mpa
380Mpa
420Mpa
Aluminum
0.25"(6mm)
400-520mm
460-590mm
500-580mm
0.50"(13mm)
300-800mm
350-420mm
400-510mm
0.75"(19mm)
220-280mm
260-380mm
300-420mm
Stainless steel
200-260mm
240-310mm
260-350mm
80-120mm
100-150mm
125-180mm
0.76"(20mm)
50-65mm
70-90mm
100-120mm
1.18"(30mm)
15-25mm
30-40mm
40-50mm
Glass
1200-1400mm
1600-1900mm
2100-2300mm
0.39"(10mm)
600-700mm
700-800mm
820-900mm
0.79"(20mm)
330-400mm
400-500mm
600-800mm
Marble
0.24"(10mm)
1000-1200mm
1350-1550mm
750-850mm
220-300mm
310-380mm
400-480mm
1.97"(50mm)
130-150mm
Tile
0.59"(15mm)
1400-1500mm
1600-1800mm
Copper plate
0.20"(5mm)
500-600mm
900-1000mm
190-220mm
80-100mm
120-150mm
QUESTION
ANSWER
Reference data on max thickness of different material
The Max. Thickness for ALL Metal Material: 100mm For Wood: 150mm For Rubber: 100mm For Tile/Marble: 150mm
Advantages of Win-Win in terms of software and hardware
1. The most popular Waterjet CNC System: WEIHONG 2. Absolute Encoder System 3. Full 304 Stainless Steel Structure 4. Oil-Immersed Linear Guide Assembly 5. Thick Linear Guide, Large Ball Screw 6. Full Enclosed Dust Cover 7. Height of Z-AxIs 200mm 8. International Standard Spare Parts, Easily Purchase in local Market 9. Accumulator Maintenance-Free 10. Variable Oil Pump, High Performance Motor 11. Double Oil Filtration System 12. We could provide OEM service for customers 13. Core Components Warranty for 2 Years 14. Permanently Technical and After-Service online
All parts that need to change for every day, week, month, quarter month, half yearly and yearly.
For Consumption: In General our machine consupmtion for Abrasive, Electric, Water as Chinese Standard: US$6.5/hour. the general consumable parts: Orifice, Nozzle, On/off Valve Repair Kits,High-Pressure Seal Kits The purchase amount according to our customers' feedback: US$1000-2000/year It depends the daily working condition of each machine.
The same abbrasive material to cut all different type of material like steel, wood, titanium, copper? please list out what type of abbrasive for what type material to cut
1. It's able to use same type of abrasive to cut different materials. 2. As well, you could adopt different type of abrasive to cut different materials. 3. If you adopt larger mesh for abrasive, the cutting edge would be smoother. If you adopt lower mesh for abrasive, the cutting speed would be faster.
Can we recycle the abbrasive material?
In general, we couldn't recycle the abrasive
How many types and sizes of nozzles?
Our machine: 7.14mm x 1.02mm x 76.2mm / 7.14mm x 0.76mm x 76.2mm We can customize the special inner diameter of nozzles according to customer requirement.
How to do programming?
We use AutoCAD software to draw the shape. save as a DXF file, then transit it to CNC System by USB key. And use NC Studio(software of WEIHONG System) to execute the processing. All the methods we will note it into the manual.
Does software show "working time" for nozzle?
Yes
Does software show maintenance reminder?
Does software calculate cycle time and speed after program is done?
What is the weight and dimension of cutting table, intensifier pump, cooling tower, abrassive feeder and CNC control system?
Cutting Table: 1500 Kgs/2.89㎡ Intensifier Pump: 1000 Kgs/1,2㎡ Abrasive Feeder: 100KG/0.5㎡ Cooling Tower: 50KG/0.5㎡ Equipments are meeting the weight limitation (Actual weight should calculate the Workpiece.)
00:00
Produc Description
Waterjet cutting 3-axis to 5-axis Upgrade Plan
The 3-axis waterjet is upgraded to a 5-axis waterjet, and the waterjet system, driver, motor, and related wires need to be
replaced. It is recommended to use the Weihong waterjet system for a complete set of electrical appliances and systems, which has
good stability and high compatibility. Customers do not need to worry about debugging. The problem, because Win-Win company has a
mature debugging process and remote debugging capabilities, A&V company has done a lot of waterjet cutting upgrade and
transformation projects, all of which have been completed perfectly at present, trust us, we can make your old equipment looks
new and become a new design waterjet cutting equipment.
Features of Win-Win waterjet cutting machine
The X-axis of the cutting platform is made of aluminum alloy and is characterized by light weight, good structure, no
deformation. This is the most advanced technology in the field of water cutting.
Technical specifications
The split cutting table prevents the influence of long-term stress change on the bearing platform and improves the cutting
accuracy.
Main Features
(intensifier pump model are optional)
Cutting samples
Cutting speed parameters
Our Service & FAQ
Guarantee of abrasive waterjet cutting
1 YEAR for the whole machine, within 1 year under normal use and maintenance, if something is wrong with the machine, you will get spare parts FOR FREE, consumable parts are excluded. Out of 1 year, you will get spare parts at cost price. You will also get technical support and service all the lifetime.
Technical support for abrasive waterjet cutting
1, Technical support by
2, Friendly English version manual and operation video CD disk
3, Engineer available to service machinery overseas
Abrasive waterjet cutting After sales services
Normal machine is properly adjusted before dispatch. The machine will be accomplished within one week after arriving at user's site, we can provide free training for your operator. You will also get free suggestion and consultation, technical support and service by
The Max. Thickness for ALL Metal Material: 100mm
For Wood: 150mm
For Rubber: 100mm
For Tile/Marble: 150mm
1. The most popular Waterjet CNC System: WEIHONG
2. Absolute Encoder System
3. Full 304 Stainless Steel Structure
4. Oil-Immersed Linear Guide Assembly
5. Thick Linear Guide, Large Ball Screw
6. Full Enclosed Dust Cover
7. Height of Z-AxIs 200mm
8. International Standard Spare Parts, Easily Purchase in local Market
9. Accumulator Maintenance-Free
10. Variable Oil Pump, High Performance Motor
11. Double Oil Filtration System
12. We could provide OEM service for customers
13. Core Components Warranty for 2 Years
14. Permanently Technical and After-Service online
1. It's able to use same type of abrasive to cut different materials.
2. As well, you could adopt different type of abrasive to cut different materials.
3. If you adopt larger mesh for abrasive, the cutting edge would be smoother. If you adopt lower mesh for abrasive, the cutting speed would be faster.
Our machine: 7.14mm x 1.02mm x 76.2mm / 7.14mm x 0.76mm x 76.2mm
We can customize the special inner diameter of nozzles according to customer requirement.
We use AutoCAD software to draw the shape. save as a DXF file, then transit it to CNC System by USB key.
And use NC Studio(software of WEIHONG System) to execute the processing. All the methods we will note it into the manual.
Cutting Table: 1500 Kgs/2.89㎡
Intensifier Pump: 1000 Kgs/1,2㎡
Abrasive Feeder: 100KG/0.5㎡
Cooling Tower: 50KG/0.5㎡ Equipments are
meeting the weight limitation
(Actual weight should calculate the Workpiece.)
Our Company
Win-Win has been engaged in waterjet cutting industry for more than 15 years. specialized in design, R & D and manufacture of ultra-high pressure water cutting equipment and accessories. Committed to providing global customers with first-class waterjet cutting products. Our founders are industry pioneers, a group of lovely engineers, fascinated by the breakthrough and progress of ultra-high pressure technology. In our own 25000 square meter standardized workshop, you can see automated production lines, standardized
inspection process
100% pre-sales testing, especially the best R & D and design team which has mastered more than ten ultra-high pressure core technologies and processes. We are not only a supplier of durable and high-quality ultra-high pressure waterjet cutting equipment and parts, but also your reliable partner.
Packing & Delivery
Our packing details
1. Video and picture inspection equipment packaging
2. All parts are made of soft materials to avoid all possible damage during delivery
3. Fine packaging,waterproof and anti-rust
4. The bottom of the wooden box is strengthened to facilitate handling and transportation
5. Take photos to record the loading and unloading process and methods
6. Using fumigation treated wooden case. No need timber inspection,saving shipping time.
Test about 20-30 working hours before delivery
make sure the machine in perfect condition.
