Genset Working Condition
| Acceptable Working Conditions |
| Ambient temperature: -25℃~+45℃ |
| Relative humidity: <30%(20℃) |
| Atmospheric pressure: 100kPa |
| Altitude: ≤500m |
| Applied Gas: Natural gas |
| Acceptable fuel gas pressure: 10~50kPa, CH4 Content ≥85% |
| Gas doesn't include free water or free materials (the size of impurities should be less than 5μm |
Genset Specification
| Gas Generator Set Data | |
| Genset Model | U1GC1000-G |
| Continuous Power | 1000kW/1250kVA |
| Output Type | 3P4W |
| Voltage Output | 400/230V, 6.3kV, 10.5kV |
| Power Factor CosΦ | 0.8 lagging |
| Frequency(Hz) | 50 |
| Rated Speed(RPM) | 1500 |
| Gas Genset Electrical Efficiency | 38% |
| Gas Genset Thermal Efficiency | 45% |
| Total Efficiency | 83% |
| Gas Consumption at Full Load | 9.47MJ/kWh |
| Lubricant Oil Consumption | ≤0.3g/kWh |
| Voltage Stabilized Regulation | ≤±1.5% |
| Voltage Instantaneous Regulation | ≤±20% |
| Voltage Recovery Time(s) | ≤1 |
| Voltage Fluctuation Ratio | ≤1% |
| Voltage Wave Aberration Ratio | ≤5% |
| Frequency Stabilized Regulation | ≤1%(adjustable) |
| Frequency Instantaneous Regulation | 10%~12% |
| Frequency Fluctuation Ratio | ≤1% |
| Net Weight, Open Type | 11980kg |
| Dimension, Open Type | 6100*1800*2570mm |
| Gas Engine Data | |
| Model | K50N-G10 |
| Brand | Cummins |
| Type | 4 Cycle, 60°Vee, 16 Cylinder |
| Aspiration | Turbocharged and Aftercooled |
| Continuous Power | 1100kW(1475BHP)@1500rpm |
| Bore*Stroke(mm) | 159*159 |
| Displacement(L) | 50 |
| Compression Ratio | 11.5:1 |
| Speed(rpm) | 1500 |
| Wet Weight(kg) | 5800 |
| ComAp Controller IG500-G2 or Deepsea Controller DSE8620 MKII |
| InteliGen 500 is a paralleling controller with 5" colour display for advanced gas generator sets applications, supporting both single and multiple gen-sets running in synchronization with mains grid network or island operations. Remote connection & monitoring Start-up synchronization Dynamic spinning reserve Built-in color display Built-in Ethernet port |
| Synchronization Panel | |
| Model | U1S1000 |
| Capacity | 2000A |
| Air Circuit Breaker Brand | ABB/SCHNEIDER/CHINT |
| Controller | DSE8620 MKII/ComAp IG500G2 |
| Features: Automatically synchronize gas gensets Automatically unload the genset Programmed start and stop genset Genset monitoring and protecting Synchronize gensets with national grid(mains)/Multiple gensets paralleling |
| 40ft-high Containerized Canopy |
| Features: ISO 40ft high container with CCS certificate. Top-quality of paint to guarantee good protection under hard weather. Weather-proof, dust-proof, sound-proof, suitable for rigorous environment. All canopy parts are designed with modular principles and canopy materials use strong steel board. All metal canopy parts are painted by electrostatic polyester powder paint. Efficient air intake and exhaust system to ensure stable output. Scientific design & advanced techniques to reduce noise level to 75~85dBA, materials and its covers further ensure sound absorbing efficiency and protection function. Locks of canopy design are more convenient for the operation and maintenance also ensure the safety of genset more. Lifting-eye and forklift design are easy for transportation. Emergency stop push button outside of canopy. Well-formed and compact design, the big built-in muffler makes the noise lower. |
| Automatic Oil Filling, Murphy Brand(optional) |
| Features: Automatically add lubricant oil for gas genset so that gas genset can keep continuous running without stopping. |
| Horizontal remote radiator(optional) |
| Features: Automatically add lubricant oil for gas genset so that gas genset can keep continuous running without stopping. |
| Heat Recovery System(optional) | |
| Material | Stainless Steel |
| Heat Exchangers | Jacket water plate heat exchanger and exhaust heat exchanger(boiler) |
| Electrical Efficiency | 38% at 1000kWel |
| Thermal Efficiency | 45% |
| Thermal Power | 1184kWh |
| Temperature in water supply system | 60℃ |
| Temperature of water outlet | 85℃ |
| Hot water consumption | 11.3L/s |
| Features: Increase the total efficiency. Hot water can be for the life and industrial use. |
1.What is your power range of your gas generator
Answer: We can provide power from 20kW to 3000kW.
Answer: We accept T/T.
Answer: MOQ is 1 set.
Answer:50/60Hz.380/220V, 400/230V, 6.3kV,10.5kV or as customer require.
Answer: Yes
Answer: Video inspection or direct factory inspection are both possible.




-
Step 1
Payment and order readiness
Minimum order: 1 Units
Payment terms, specifications, and order details are confirmed before preparation begins.
-
Step 2
Preparation
40 days
-
Step 3
Packaging and dispatch
Ocean freight via Maersk · Approx. shipping fee: $ 0.84 for 1 unit · Transit time: Est. 17-24 days
Final packing, freight, and delivery dates are confirmed before dispatch.
Customer reviews
No reviews yet
Be the first customer to review this product.
Write a review
Request custom sourcing
Can’t find what you’re looking for? Share the requirement and our sourcing team will find the right industrial product.