Energy -saving Air To Air Heat Pump Fruit dryer/dehydrator/drying equipment-Inergrated type
A heat pump dryer absord heat from ambient air by evaporator, or recovery the waste heat during the drying proceed, by compressor compress, move (transfer) heat energy to a dry cabinet or room, the hot air in the cabinet heating and circulating repeatedly to absord mositure water from materials, thereby vaporizes mositure from the materials surface, by hot wind dehumidifing or condensor removing water out till material dry.
Test Condition: Dry bulb 25 ℃,Wet bulb 20 ℃,initial room temprature 25 ℃, final room temprature 80 ℃.
Environmental protection
Adopt heat from natural as energy, no waste pollution, no Combustible Emissions, no poisonous discharge, very environmental friendly.
Safety
Air to air heat pump water heater use media for heat exchange, water and electricity isolated to eliminate shock hazard. It don’t use fuel to avoid inflammable, explosive, toxic phenomenon, absolutely safe.
Easily operation
Large Intelligent touch screen LCD integrated temperature,time,drying curve, humidity control,multi-protection,checking running parameters, adjusting air pressure, alarming failure and auto power off protection are easily realized for users thanks to this technology to ensure the machine running stable, no need extra workers to operate to save your bill.
Efficient heat recovery
During the exchange between the fresh air and the exhaust air, waste heat from the drying room will be collected again. The absorbing rate can reach 60%.
Researches indicated that our heat pump drying machine (dehydrator machine) can -50% energy meanwhile ensuring good drying quality.
| Various Drying Energy Machine Economy Comparison Table | |||||||
| Heating Mode | Heat Pump Dryer | Electric Heating | Coal Boller | Oil Fired Boiler | Gas Boller | Biomass Stove | Regular Heat Pump Dryer |
| Remove 1kg of water required heat energy | According to information provided by the relevant authority of the document, the average 1kg of water to remove heat energy required for 1.35 kw/kg, namely 4860kj/kg | ||||||
| Fuel type | Electric | Electric | Coal | Diesel | Gas | Biomass | Electric |
| Heat Value | 3600kj/kg | 3600kj/kg | 23027kj/kg | 33494kj/kg | 36006kj/kg | 17459kj/kg | 3600kj/kg |
| Thermal efficiency | 400% | 95% | 30% | 85% | 85% | 90% | 350% |
| Effective thermal value | 14400kj/kg | 3420kj/kg | 6906kj/kg | 28469kj/kg | 30605kj/kg | 15713kj/kg | 12600kj/kg |
| Fuel Price | 0.1$/kwh | 0.1$/kwh | 0.1$/kg | 1.2$/L | 0.8$/m 3 | 0.2$/kg | 0.1$/kwh |
| Fuel consumption | 0.337kwh | 1.42kwh | 0.7kg | 0.17L | 0.159m 3 | 0.375kg | 0.386kwh |
| Fuel consumption($) | 0.33 | 1.42 | 0.7 | 1.26 | 0.795 | 0.37 | 0.39 |
| Labor management, warehousing costs | Low | High | Higher | High | High | Low | Low |
| Safety performance | Safe | Unsafe | Unsafe | Unsafe | Unsafe | Safe | Safe |
| Environmental pollution | None | Very serious | More serious | More serious | Light pollution | None | None |
| Life of equipment | 10-15 years | 5-8 years | 6-9 years | 6-9 years | 6-9 years | 8-12 years | 10-15 years |
Drying Herbs
pseudo-ginseng,aniseed,dendrobe,Chinese yam,glossy ganoderma,sea cucumber,honeysuckle flower,fructus momordicase(luo han guo), cassia,ginseng,ginger,maca etc.
Drying Agriculture products
Dragon fruit flower,rose,mushroom,tobacoo leaf,white fungus,edible tree fungus,red chili,grain,rice, wheat,vegitable,bamboom shoot,cassava,starch etc.
Drying Fruit
Longgan,litchi,banana,mango,waxberry,plum,lemon,raisin,artocarpus heterophyllus lam,kiwi fruit, dried persimm
| FAQ |
Q1. What is your terms of packing? A: Generally, we pack our goods in neutral cartons and polywood. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. Q2. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance. Q3. What is your terms of delivery? A: EXW, FOB, CFR, CIF, DDU. Q4. How about your delivery time? A: Generally, it will take 30 to 40 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Q5. Can you produce according to the samples? A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures. Q6. What is your sample policy? A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. Q7. Do you test all your goods before delivery? A: Yes, we have 100% test before delivery Q8: How do you make our business long-term and good relationship? A:1. We keep good quality and competitive price to ensure
A: Generally, we pack our goods in neutral cartons and polywood. If you have legally registered patent
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
A: EXW, FOB, CFR, CIF, DDU.
A: Generally, it will take 30 to 40 days after receiving your advance payment. The specific delivery time depends
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
A: Yes, we have 100% test before delivery
A:1. We keep good quality and competitive price to ensure




-
Step 1
Payment and order readiness
Minimum order: 2 Units
Payment terms, specifications, and order details are confirmed before preparation begins.
-
Step 2
Preparation
35 days
-
Step 3
Packaging and dispatch
Ocean + Truck via Maersk · Approx. shipping fee: $ 779.60 for 2 sets · Transit time: Est. 17-24 days
Final packing, freight, and delivery dates are confirmed before dispatch.
Customer reviews
No reviews yet
Be the first customer to review this product.
Write a review
Request custom sourcing
Can’t find what you’re looking for? Share the requirement and our sourcing team will find the right industrial product.