Gantry Type Waterjet Machine AC 5 Axis Waterjet Cutter Tile Granite Stone Marble Mosaic Waterjet Cutting Machine

Title goes here.

AC 5 Axis Waterjet Cutting Table

Type

Gantry

Effective Working Area

X-Axis 4000mm, Y-Aixs 2000mm, Z-Axis 200mm

Max. Swivel Angle

±68°

Swivel Angle Resolution

±0.01°

Cutting Accuracy

0.1mm

Control Accuracy

0.01mm

Repeatability of Positioning

0.025mm

Max. Travel Speed

10000mm/min

WW5060JET Intensifier Pump

Voltage

380V / Customize

Rated Power

30KW / 40HP

Max. Operating Pressure

420Mpa / 4137Bar / 60,000Psi

Max. Discharging Rate

3.8L/min

Orifice Diameter

0.33mm or others

Nozzle Diameter

1.02mm or others

Oil Tank Volume

150L

00:00

Product Description

company supports color customization, this equipment is WW5060jet intensifier pump + 4020 AC 5 cutting table, full stainless steel protective structure, good protection, no rust, oil immersed structure, long service life of ball screw and linear guide, fully aluminum alloy cutting head, light weight, reduce the load of the cutting table, AC 5 axis head, cutting angle can reach ±68°, C axis can be 360° rotation.

The whole set waterjet cutting machine equipped with AC 5 axis cutting head, 4000mm x 2000mm cutting table, the WW5060JET intensifier pump, WEIHONG CNC control system, 200KGS abrasive feeder, industrial chiller and also the water soften system.

A. High-Quality Cutting Head

Aluminum AC-5aixs waterjet cutting head, light weight but high hardness, lighten gantry running load, relatively fast walking speed, higher cutting efficiency.

B.

Fully Oil-Immersed Linear Guide

WW4020-5A adopts thick linear guides and large screw balls. The X, Y axis adopts the self-made oil-immersed screw guide rail lubrication method, which is better than the traditional timing lubrication effect, better dust-proof effect, and service life Longer.

C. Integrated Stainless Steel Bath

The table is made of fully stainless steel, anti-rust, anti-corrosion, bright as new for 10 years.

D. The cutting table size can be customize.

Swing angle ±68°, absolute encoder control system.AC cutting head is equipped with high quality hardware, swing Angle can reach ±68°, equipped with Weihong system and servo motor, high precision, accurate calculation, with altimetry system, first choice waterjet equipment for cutting large Angle parts

A.

High Performance and Standard Design

Universal Structure Design, International Standard Spare Parts. High versatility of accessories, customers can purchase the corresponding parts in any waterjet machine market.

B. Double Oil-Filtration System

Double filtration devices are set at the oil inlet and oil return port to ensure the oil path is clean, smooth and not blocked

and prolong the service life of the Intensifier Pump.

C. Double-Level Water-Filtration System

WW5060JET adopts double layers of water filtration in low pressure water transport to remove hard metal elements from industrial water. The waterjet is less likely to produce scale, protecting important high pressure components and extending the service life of the entire Waterjet Cutting Machine.

D. 1L Large Capacity Accumulator

1L capacity accumulator, eliminate the fluctuation of the cutting, integral forging, no rubber seals, maintenance-free.

*

Brand

WEIHONG

Industrial-grade display, waterjet special software, easy to operate.

* Simulation operation, pause and start at any time, continue to cut from any position and point.

Wall Thickness

4.5mm ( Explosion-proof)

Air Pressure

0.4-0.8Mpa

Reasonable design, make this large-capacity abrasive tank cut 8-10 hours without interruption.

Large diameter flange at the bottom, easy to remove the debris.

The industrial chiller adopts automatic temperature control, which can meet continuous operation 24 hours a day.

Adopts shell-and-tube two-device linkage technology, low vibration, low noise, high-efficiency heat exchange material, and high energy efficiency ratio.

Use a water filtration system to remove calcium and magnesium ions from water to prevent scaling.

Good water quality will not only increase the life of the seal but also prolong the reliability and life of the nozzle, orifice

high pressure seal etc. resulting in more efficient cutting.

Optional Devices

Abrasive Removal System

When the waterjet cutting machine operates, the large-scale abrasive removal system operates automatically without affecting each

other.

The device can be installed within 10m of the waterjet cutting machine.

The flow rate can reach 162L/min.

The abrasive removal rate is more than 90%.

During the entire abrasive removal process, the filtered water continues to be discharged into the water sink, and the water sink

does not need to be replenished after abrasive removal.

Waterjet Parts Warehouse

Our Company

Win-Win waterjet is specialized in designing, researching, developing, manufacturing and selling of high-pressure waterjet cutting system, robot waterjet cutting machine, portable waterjet cutter and also waterjet spare parts. In the past 20 years, Win-Win have developed a huge sales and a strong technical team. Provide high-quality after-sales and technical services. manufacture robot waterjet cutting station, fully enclosed waterjet cutting machine, intensifier pump, portable waterjet cutting machine and waterjet accessories. We have more than 20 patented technologies. also have a high credit line in. With CE, ISO and SGS certification, Win-Win is the main platform for global customization of waterjet cutting business. Provide cutting solutions for 3000 customers around the world.

You May Also Like