5Axis Waterjet Cutting Machine 4000*2000mm Size for Stone Glass Metal
CNC water-jet cutting machine is composed with cutting table, HP pump, CNC control system with waterjet cutting software, cutting head, Hp water valve, and sand controlling system. Auto abrasive feeding system and water cooling system are needed. Also you can choose optional systems such as water softening system and auto sludge removal system according your requests.
| Model | GC 4020 WJ- 5 A |
| Structure | Split Gantry Type |
| X axis | 4000mm |
| Y axis | 2000mm |
| Z-axis | 300mm |
| A-axis | ±75° |
| C-axis | ±720° |
| Effective cutting area | 4000×2000mm(bevel 45 degree) |
| Control accuracy | ±0.01mm |
| Repeatability accuracy | 0.02mm |
| Running Speed | 15m/min |
| Power | 380VAC, 50Hz, 3 phase 4 wire system (can be customized) |
1.1.1 Structure feature
The machine body with the welding box structure, then make stress relief by annealing process.
Table body and water tank which are split structure, lessen the splash of sands and water into moving parts, It is also conducive to the disassembly and transportation of the machine.
X-axis and Y-axis transmit to rolling ball screw mandrel.
1.2 Controlling system
We adopt the WEIHONG controlling system based on the ADVANTECH industry computer
YASKAWA digit servo driver and motor.
1.3Transmission system
We adopt HIWIN linear guide rail and TBI ball screw to ensure accuracy and quality
1.4 Prevention system
Over travel auto spacing function and soft spacing function
Unique prevention design: new mazy protection and z-axis totally enclosed professional design prevent sand and water from eroding the guide screw and linear guide rail.
1.5Lubrication system
We adopt auto mass lubrication system to make oil reach every oil site on time and also make table steadier and easier.
2. Cutting head assembly
GC hp water switch
Air valve can open and close the hp water instantaneously.
With the help of CNC we can control hp water automatically.
Blockage pressure can be adjusted arbitrarily to realize
the operation under the low pressure circumstances
GC abrasive feeding system
Dynamic sand feeding
Manual makes up the sand for the feeder
(assisted with sand meter, auto feeder
3. CNC Controller and soft
17”LCD touch screen display
DNC on-line working function
Functions of returning arbitrary point, bending
and circular arc working auto deceleration.
Function of cutting figure imitation display.
80GB memory hard disk
MITSUBISHI AC servo driver and motor.
1GB memory card
Multilingual function( Chinese English,etc., )
Drive-by-wire and hand-hold controller,( according to requests )
NcStudio PCIMC-6A special software is special for GC.
The functions of PCIMC-6A are as follows
Change DXF document which is educed from AUTOCAD
into numerical control process.
Serial communications between PC and CNC.
Open database can shore parameter, just click the material
prameter will be loaded automatically
Calculate length of line and time automatically
Control cut-out and cut-in automatically
cutting track auto imitation function
The functions of lessening speed on the corner remanding material bridging and lancing
3D Programming & Nesting-IGEMS
| Modules | Remarks |
| CAD-system | Includes basic 2X drawing commands such as line, circle, rectangle, copy, cut etc. Very user-friendly for operation. You can generate the geometry in the CAD-system. Note: it is one of the basic and necessary modules that support IGEMS. |
| CAM tools | Includes commands for analyzing, preparing and optimizing the geometry before starting to make a toolpath. Note: it is one of the basic and necessary modules that support IGEMS. |
| 3-Axis CAM | Includes all the tools required to setup the machine and material database, prepare CNC files for the cutting process, postprocessing, calculate cutting times and much more. Note: it is one of the basic and necessary modules that support 5X-waterjet. |
| AWJ module | AWJ stands for Abrasive Water Jet. So it is necessary for the Abrasive Water Cutting machine. By this module you can adjust the abrasive flow, pressure, speed, drilling and etc. |
| Nest level 1 | This module is used to SEMI-automatically place parts on a sheet of material and minimize the material waste. |
| 5-Axis CAM | This module provides tools to prepare cutting in a 5-axis cutting machine. Strategies supported are cutting with fixed or various angles in flat material It supports the 3D file such as.STEP, IGS or STL file made in a 3D-system and add the toolpath in 3D |
to Abrasive Feeding System
4.1 The working environment is clean and tidy.
control the hydraulic system oil temperature.
4.2 Oil chiller
Model: GC250PAX
It can be set to any temperature, and is not subject to the working environment.
Voltage:380V 50Hz 3 Phase
Total unit capacity: 10.8KW
Water pump flow80L/min
Water lift:25m
Water Capacity:165L
Chilled water pipe diameter: G1.25”
Dimension: 980×1020×1700mm
Weight: 350KG
5.Water Soften System
Here are many kinds of compounds in the running water.
(Calcium carbonate, carbonic acid)As the machine
working, the raising of the temperature will generate
some substance of the reaction of chemistry or physics-as
we called it furring, which will reduce the life of the high
pressure system and increase the cost. After many years’
experiences, the system can solve the problem.
Certifications & compliance
CE(2)
Complies with EU standards
